How to Connect a Gas Analyzer to iPhone via Bluetooth

February 27th, 2018How to Connect a Gas Analyzer to iPhone via Bluetooth

To connect a gas analyzer to iPhone you will need to download the MRU4U app from the iTunes store, then follow the steps below to configure the settings:

Connect a Gas Analyzer to iPhone: Setting up the Optima 7

STEP 1

Open the Measurement Menu, then press F3 to pull up the extras sub-menu. Select "Settings", then press OK.

STEP 2

Once the Settings Screen appears, press F2 to pull up the Bluetooth settings screen.

STEP 3

Using the arrow left/right, modify the bluetooth settings as follows for IOS:

  • Bluetooth —>  BT-LE
  • Bluetooth Transmiss  —> Slave
  • Protocol —> Type 1

Mode: Online

Once you have modified these settings, switch off the analyzer.

STEP 4

Restart the analyzer. Re-open the Measurement Menu, press F3 to pull up the extras sub-menu. Select "Settings", then press OK.

STEP 5

On the extras menu, scroll down and select "Device Info", then press OK.

STEP 6

When the device info screen opens, press the folder button. Select "Bluetooth" and press OK.

STEP 7

When the Bluetooth screen appears, press the folder button again. Select "Initialize" and press OK.

STEP 8

The screen will display the following message:

''The changes will take effect after a restart. Switch off the device please." Restart the analyzer.

Connect a Gas Analyzer to iPhone: Setting up your iPhone

STEP 1

Go to the settings menu on your iPhone and ensure that Bluetooth is turned on. If not, select Bluetooth to open the Bluetooth screen. Click on the Bluetooth radio button to activate — the button will be highlighted green when Bluetooth is on.

iPhone will now start searching for devices, but won’t find any until you activate the MRU4U app.

STEP 2

Open the MRU4U app and select "Connect & Measure" from the Home screen.

STEP 3

On the Connect & Measure screen, select "Connect Device".

STEP 4

When the Bluetooth screen appears, select "New Device".

Once the analyzer and the iPhone are connected, the iPhone will display the analyzer name and serial number. 

Diamond Scientific is constantly seeking opportunities and products that will contribute to a better world. By providing equipment that will offer environmental benefits, as well as cost benefits to those pursuing alternative energy solutions, we hope to do our bit to lessen the impact of energy production on our environment and climate.

  • MRU4U app
  • How to Connect a Gas Analyzer to iPhone via Bluetooth
  • mru gas analyzer
  • mru software
  • February 27th, 2018
  • Admin

Leave your comment

Your Name:

Your Comment:
Note: HTML is not translated!

Categories

Subscribe Us

Sign up our newsletter to get daily updates of new articles...